tiedot
Follow us: youtube linkedin blog

Alarm Monitoring Device



PCAT-02

The PCAT-02 is a Power supply / UPS Alarm Monitoring and Management module, which monitors the status of power supply / UPS at Building Area Network (BAN) locations connected to PCAT-02 through RJ-45 serial connector and sends alarm management information to the NMS.

The PCAT-02 is managed through its IP address. An RJ45 Ethernet interface (10 Base-Tx) is provided to send/receive alarm management information to/from the NMS. UDP/IP protocol is used to monitor the status of alarms collected by the PCAT-02.

Features

To monitor status of power supply / UPS at Building Area Network (BAN) locations connected to PCAT-02 through 10Mbps Ethernet port and sends alarm management information to the NMS.
Input alarms connector (Alarm In) provided on standard RJ45 connector is capable of monitoring status of three (3) alarm relay contacts of the UPS.
Output Connector (Relay Contact Output) provided on standard RJ45 connector is capable of providing Two (2) alarm relay contacts which can be used to starting of diesel generator etc from the central location through the Liteview NMS.
RJ45 Ethernet interface (10 Base-Tx) on the module provided to send alarm management information from the power supply/UPS to the NMS.

Click to Chat